CD74HC273M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 150 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 45 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC273M Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. Currently, the output is configured to use Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. In the operating environment, the temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. The 74HCseries comprises this type of FPGA. There should be no greater frequency than 60MHzon its output. In total, there are 1 elements. Currently, there are 20 terminations. D latch belongs to the 74HC273 family. It is powered from a supply voltage of 4.5V. This JK flip flop has a 10pFfarad input capacitance. HC/UHis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 8bits. The maximal supply voltage (Vsup) reaches 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Using 8 circuits, it is highly flexible. It runs on 2/6Vvolts of power. As a result of its output current of 5.2mA, it is very flexible in terms of design. Despite external influences, it consumes 8μAof quiescent current.
CD74HC273M Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
CD74HC273M Applications
There are a lot of Texas Instruments CD74HC273M Flip Flops applications.
- Single Down Count-Control Line
- Registers
- Functionally equivalent to the MC10/100EL29
- Frequency Dividers
- Asynchronous counter
- ESD protection
- Divide a clock signal by 2 or 4
- Synchronous counter
- ESCC
- ESD performance
