Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Additional Feature |
COMMON I/O PINS; GATED OUTPUT CONTROL |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Frequency |
50MHz |
Base Part Number |
74HC299 |
Pin Count |
20 |
Number of Elements |
1 |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8-Bit |
Load Capacitance |
50pF |
Number of Bits |
8 |
Propagation Delay |
300 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
300 ns |
Family |
HC/UH |
Logic Function |
Shift Register |
Direction |
Bidirectional |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
Universal Shift Register |
Output Polarity |
TRUE |
Max I(ol) |
0.0052 A |
Trigger Type |
POSITIVE EDGE |
Schmitt Trigger |
No |
Number of Input Lines |
3 |
Input Current |
1μA |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HC299M Overview
20-SOIC (0.295, 7.50mm Width) contains this file. Packaged in the manner of Tube. Flexible 8-Bit circuits are used to achieve its superior performance. Logic type Universal Shift Register describes this electrical device. An electronic part such as this one is mounted in the way of the Surface Mount-axis. A higher operating temperature than -55°C~125°C is recommended. The high/low output current of 7.8mA 7.8mA enables maximum design flexibility. As part of the 74HC series, it is a type of FPGA. With a voltage supply of 2V~6V, it is able to operate. The 74HC299 family is comprised of it. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. When the supply voltage is above 4.5V, the device will operate normally. The 20 pin count is provided. 8 Bits were used in the design of this electronic part. A Surface Mount-shaped electronic component is mounted here. A 20-pin is used for its design. The device belongs to the HC/UH family of electronic devices. There is a maximum voltage supply (Vsup) reached when 6V is reached. A higher voltage supply (Vsup) should be used. Powered by 2/6V power supplies, it runs on a battery. 1 elements make up the structure. There is a trigger configured with POSITIVE EDGE. The second characteristic that it has is COMMON I/O PINS; GATED OUTPUT CONTROL. In this case, 8μA of quiescent current is consumed without being affected by any outside forces. As part of the switching power supply, there is a line called the 3 input line, which consists of an electronic circuit that is connected between the ac mains and the rectifier input stage of the switching power supply. 50MHz is the frequency that can be achieved.
CD74HC299M Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
74HC299 family
20 pin count
20 pins
2/6V power supplies
1 elements
CD74HC299M Applications
There are a lot of Texas Instruments CD74HC299M Universal Bus Functions applications.
- Mobile caravan
- Wearable Health and Fitness Devices
- Freezer warning buzzer circuits
- Tablets
- Agriculture and light complementary power station
- measuring instrument
- Range hood
- Square wave oscillators
- Alarm circuit using LDR
- Electronic and electrical project circuits