CD74HC366E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HC366 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Output Type | 3-State |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 6 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 6 |
| Propagation Delay | 19 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 19 ns |
| Family | HC/UH |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | Buffer, Inverting |
| Prop. Delay@Nom-Sup | 33 ns |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.08mA |
| Count Direction | UNIDIRECTIONAL |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC366E Overview
Logical driver uses a neat 16-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Buffer, Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -55°C~125°C TA. The high and low logic state output current of logical driver is 7.8mA 7.8mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74HC series devices. 16 terminations with different functions. Buffer IC reuqires a supply voltage of 4.5V. There is a HC/UH family part that is attached to this electronic component. 16 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 16 pins. Enhanced with 2 ports. You can search "74HC366" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. To supply the device, a minimum voltage of 2V is a must. 6 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 6 channels for high quality communication. It is sufficient to make 6 outputs.
CD74HC366E Features
Bus Driver/Transceivers
WITH DUAL OUTPUT ENABLE
CD74HC366E Applications
There are a lot of Texas Instruments CD74HC366E Buffers & Transceivers applications.
- Mainframes, workstations or storage devices
- Optical sub-assembly (OSA)
- Televisions
- Single to Multimode Fiber Conversion
- Telecom and datacom networking applications
- Low power, low voltage systems
- Precision engineering measurement
- Solenoids
- Remote controls
- Changeing the frequency from IF to RF
