CD74HC373E
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 30 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 45 ns |
| Control Type | ENABLE LOW/HIGH |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
CD74HC373E Overview
In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. The package is in the form of Tube. Tri-State is the output configured for it. The Logic type of this electrical device is D-Type Transparent Latch. A Through Hole mount is used for mounting this electronic part. It operates at a voltage of 2V~6V. It is -55°C~125°C at the operating temperature. This FPGA is part of the 74HC series. There are 8 bits in this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family in which it belongs to is 74HC373. In order to function, the supply voltage should be set to 4.5V. There are 20 pins on it. This electronic device belongs to the family of HC/UH. This board has 20 pins on it, which is what it is designed for. A Through Hole mounting method has been used for this electronic part. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches includes this part. When Vsup reaches 6V, the maximal supply voltage is reached. There are 2/6V power supplies attached to it. A voltage greater than 2V must be supplied as a power supply (Vsup). As the output current is 7.8mA, the design flexibility is maximum. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Without external influences, it consumes 8μA of quiescent current. The superior flexibility of the system is achieved through its use of 8 circuits.
CD74HC373E Features
20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
CD74HC373E Applications
There are a lot of Texas Instruments CD74HC373E Latches applications.
- Relay
- Relay replacement
- Stacked or Push-Down Registers
- Communication systems
- Buffer register
- Automotive Body Electronics
- Up/down difference counting
- Shift left register
- Multi-line decoders
- Counting
