Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Termination |
SMD/SMT |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Base Part Number |
74HC373 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Operating Supply Current |
160μA |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
7.8mA |
Number of Bits |
8 |
Propagation Delay |
265 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
30 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
D-Type Transparent Latch |
Number of Gates |
1 |
Prop. Delay@Nom-Sup |
45 ns |
Control Type |
ENABLE LOW/HIGH |
Number of Input Lines |
9 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HC373M Overview
The 20-SOIC (0.295, 7.50mm Width) package contains it. Tube is the way it is packaged. Tri-State is the output configured for it. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. It operates at a voltage of 2V~6V. During operation, the temperature is set at -55°C~125°C. An FPGA in this series belongs to the 74HC family. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. There is no doubt that it belongs to the family 74HC373. In order to function, the supply voltage should be set to 4.5V. The device is equipped with 20 pins. This electronic device is categorized as a HC/UH electronic device. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. FF/Latches is the subcategory of this part. It reaches a maximum supply voltage (Vsup) of 6V. A total of 2/6V power supplies are needed to run it. A voltage greater than 2V must be supplied as a power supply (Vsup). There are 9 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. With an output current of 7.8mA, it is highly flexible in terms of design. Aquiescent current is consumed by 8μA without being affected by external forces. 8 circuits enable it to achieve high performance.
CD74HC373M Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies
CD74HC373M Applications
There are a lot of Texas Instruments CD74HC373M Latches applications.
- Bus system register with enable parallel lines at bus side
- Shift right with parallel loading
- Parallel data storage
- Clocks
- Registers
- Communication systems
- Automatic test equipment
- Pseudo-random code generators
- Pattern Generators
- TV Set-top Boxes