CD74HC373MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 20 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 30 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| High Level Output Current | -7.8mA |
| Low Level Output Current | 7.8mA |
| Number of Input Lines | 8 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC373MG4 Overview
In the package SOIC, it can be found. A package of Rail/Tube has been used. It is designed with 8 bits. As far as this device is concerned, it has no terminations. In order to operate it, the supply voltage must be 4.5V. The 20 pind are equipped with it. This electronic device is categorized as a HC/UH electronic device. The 20 pins are designed into it. It is mounted according to the Surface Mount method. This device has 2 ports. This part is included in FF/Latches. Electronic circuits are represented by 8 input lines. There are no external factors that affect it, so it consumes 8μA quiescent current. A total of 1 elements make up this object. The low level output current is set to 7.8mA. It has been set to -7.8mA for the high level output current. Ideally, the operating temperature should be lower than 125°C. Temperatures above -55°C should be used. The supply voltage is limited to 6V. It operates with the minimal supply voltage of 2V. As far as the logic IC is concerned, it uses BUS DRIVER. With 7.8mA, maximum design flexibility is ensured.
CD74HC373MG4 Features
SOIC package
8 Bits
20 pin count
20 pins
1 elements
CD74HC373MG4 Applications
There are a lot of Texas Instruments CD74HC373MG4 Latches applications.
- Counters
- Digital bus buffer
- Automotive Cluster
- Counter control
- Instrumentation
- Address register
- Control circuits
- Buffer register
- Pattern Generators
- Parallel Input
