CD74HC374E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 250 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | Flip-Flop |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC374E Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). The Tubepackage contains it. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses a value of Positive Edge. There is an electronic component mounted in the way of Through Hole. It operates with a supply voltage of 2V~6V. Currently, the operating temperature is -55°C~125°C TA. It belongs to the type D-Typeof flip flops. The 74HCseries comprises this type of FPGA. It should not exceed 60MHzin its output frequency. In total, it contains 1 elements. Terminations are 20. If you search by 74HC374, you will find similar parts. A voltage of 4.5V is used to power it. Its input capacitance is 10pFfarads. A device of this type belongs to the family of HC/UH. It is mounted in the way of Through Hole. The electronic flip flop is designed with pins 20. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with 8bits. Vsup reaches 6V, the maximal supply voltage. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. A total of 2/6V power supplies are needed to run it. The D flip flop is embedded with 2ports. The output current of 7.8mA makes it feature maximum design flexibility. There are 3 output lines in this JK flip flop. This D latch consumes 8μA quiescent current at all. There are 8 channels available.
CD74HC374E Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
CD74HC374E Applications
There are a lot of Texas Instruments CD74HC374E Flip Flops applications.
- Data transfer
- Computing
- Latch
- Circuit Design
- ESD protection
- Shift Registers
- Pattern generators
- Parallel data storage
- Registers
- Buffer registers
