CD74HC377E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 60MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 220 ns |
| fmax-Min | 60 MHz |
| RoHS Status | Non-RoHS Compliant |
CD74HC377E Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). You can find it in the Tubepackage. T flip flop is configured with an output of Non-Inverted. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Through Hole. It operates with a supply voltage of 2V~6V. -55°C~125°C TAis the operating temperature. D-Typedescribes this flip flop. JK flip flop is a part of the 74HCseries of FPGAs. A frequency of 60MHzshould be the maximum output frequency. The list contains 1 elements. Despite external influences, it consumes 8μAof quiescent current. There have been 20 terminations. It is powered by a voltage of 5V . A JK flip flop with a 10pFfarad input capacitance is used here. A device of this type belongs to the family of HC/UH. Vsup reaches 6V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be kept above 2V. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE.
CD74HC377E Features
Tube package
74HC series
CD74HC377E Applications
There are a lot of Rochester Electronics, LLC CD74HC377E Flip Flops applications.
- Clock pulse
- Consumer
- Bounce elimination switch
- Test & Measurement
- Asynchronous counter
- Common Clocks
- 2 – Bit synchronous counter
- Storage registers
- Frequency Divider circuits
- Safety Clamp
