CD74HC377E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latch |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC377E Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. The package Tubecontains it. This output is configured with Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A voltage of 2V~6Vis required for its operation. -55°C~125°C TAis the operating temperature. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74HCseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 60MHz. A total of 1elements are present in it. There have been 20 terminations. If you search by 74HC377, you will find similar parts. Power is supplied from a voltage of 5V volts. Its input capacitance is 10pFfarads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. The electronic part is mounted in the way of Through Hole. There are 20pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchbase part number family. 8bits are used in its design. As soon as 6Vis reached, Vsup reaches its maximum value. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. The D latch operates on 2/6V volts. It offers maximum design flexibility with its output current of 5.2mA. 8μAquiescent current consumed. Additionally, you may refer to the additional WITH HOLD MODE of the electronic flip flop. Currently, there are 8 channels available.
CD74HC377E Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies
CD74HC377E Applications
There are a lot of Texas Instruments CD74HC377E Flip Flops applications.
- Shift registers
- Communications
- Supports Live Insertion
- Convert a momentary switch to a toggle switch
- Data Synchronizers
- Circuit Design
- Data storage
- Single Down Count-Control Line
- Latch-up performance
- Automotive
