CD74HC377M96
| Parameters | |
|---|---|
| Input Capacitance | 10pF |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.0052 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
CD74HC377M96 Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. A package named Tape & Reel (TR)includes it. There is a Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. The operating temperature is -55°C~125°C TA. It belongs to the type D-Typeof flip flops. The 74HCseries comprises this type of FPGA. It should not exceed 60MHzin terms of its output frequency. In total, it contains 1 elements. It has been determined that there have been 20 terminations. It is a member of the 74HC377 family. The power supply voltage is 5V. This JK flip flop has a 10pFfarad input capacitance. HC/UHis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 20 pins. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. The design is based on 8bits. There is a 6Vmaximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The superior flexibility of this circuit is achieved by using 8 circuits. In view of its reliability, this D flip flop is a good fit for TR. It runs on 2/6Vvolts of power. As a result of its output current of 5.2mA, it is very flexible in terms of design. It consumes a total of 8μA quiescent current at any given time. Additionally, it is characterized by WITH HOLD MODE.
CD74HC377M96 Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
CD74HC377M96 Applications
There are a lot of Texas Instruments CD74HC377M96 Flip Flops applications.
- Counters
- Computing
- Pattern generators
- Power down protection
- Latch
- QML qualified product
- Instrumentation
- ATE
- Patented noise
- Differential Individual
