CD74HC390M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Reset | Asynchronous |
| Family | HC/UH |
| Direction | Up |
| Logic Type | Counter, Decade |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| fmax-Min | 35 MHz |
| Count Rate | 35MHz |
| RoHS Status | Non-RoHS Compliant |
CD74HC390M Overview
This device is packaged in a 16-SOIC (0.154, 3.90mm Width) package. This configuration uses 16terminations. Having a supply voltage of 5V enables to operate in a fully flexible manner. The 2elements are connected by wires. As [0], it is packaged. It emerges as a member of HC/UH family. This device is a member of the 74HCseries and is well suited for a wide range of applications. Counter, Decadeis adopted as the logic type. It is recommended that the operating temperature be set to -55°C~125°C. Mounting type Surface Mountis used. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array contains elements containing 4bits each. In the case of the supply voltage (Vsup), it can be as low as 2V. Depending on the device type, the maximum supply voltage (Vsup) can be up to 6V volts.
CD74HC390M Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
CD74HC390M Applications
There are a lot of Rochester Electronics, LLC CD74HC390M Counters & Dividers applications.
- Binary counter/decoder
- ANALOG SIGNAL PROCESSING
- Dual Up Counters
- ALGEBRAIC COMPUTATION
- POWER COMPUTATION
- Time-delay circuits
- Digital multiplexing and demultiplexing
- Time delay circuits
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Programmable binary and decade
