CD74HC393E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Reset | Asynchronous |
| Family | HC/UH |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Propagation Delay (tpd) | 355 ns |
| fmax-Min | 60 MHz |
| Count Rate | 35MHz |
| RoHS Status | Non-RoHS Compliant |
CD74HC393E Overview
14-DIP (0.300, 7.62mm)is a package in which this device is packaged. It is configured using 14terminations. 5Vis fully flexible due to its voltage supply. 2 elements are interconnected in wires. As a result, it is packaged in the way of a Tube. The HC/UHfamily includes it. Having been designed as a member of the 74HCseries, it is well suited to a variety of applications. It is adopted that the logic type is [0]. Ideally, the operating temperature should be set to -55°C~125°C. It adopts a mounting type of Through Hole. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. There are 4bits stored in each element of the array. There is 2V minimum supply voltage (Vsup) for this device. There is 6V maximum supply voltage (Vsup) allowed.
CD74HC393E Features
Embedded in the 14-DIP (0.300, 7.62mm) package
4 bits per element
CD74HC393E Applications
There are a lot of Rochester Electronics, LLC CD74HC393E Counters & Dividers applications.
- Divide-by-N counting
- Binary counter/decoder
- Fixed or Programmable Frequency Division
- Fixed and programmable counters greater than 10
- SQUARE ROOT
- Analog multiplexing and demultiplexing
- Decade counter/decimal decode display (CD4017B）
- Programmable decade counters
- Frequency division
- Signal gating
