CD74HC40103E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | TCO OUTPUT; RESET TO MAX COUNT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Frequency | 25MHz |
| Base Part Number | 74HC40103 |
| Pin Count | 16 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 450 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 450 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 64 ns |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 18MHz |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC40103E Overview
This device is supplied in the 16-DIP (0.300, 7.62mm) package. Using 16terminations, it can be configured. The supply voltage of 4.5V permits it to operate with full flexibility. In this diagram, there are 1elements that are interconnected by wires. In all, there are 16 pins on each component. In this case, it is packaged as Tube. As part of the circuit, there are 16pins that connect other components. Using [0], it can be mounted. In this case, it appears as a member of the family [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. It is adopted that the logic type is [0]. -55°C~125°Cis the recommended operating temperature. There is a mounting type of Through Holeon this device. As a result, the device operates more reliably when a supply voltage of 2V~6Vis applied. The array has 8elements. It is important to note that TCO OUTPUT; RESET TO MAX COUNTare really important features of this electronic device. Among its base part number [0], you will find additional parts that are related. As a result of the voltage source, there is 2/6V voltage. In the case of the supply voltage (Vsup), it can be as low as 2V. It operates at a frequency of 25MHz Hz. There is 6V maximum supply voltage (Vsup) allowed. The device consumes a quiescent current of 8μA volts.
CD74HC40103E Features
Embedded in the 16-DIP (0.300, 7.62mm) package
8 bits per element
TCO OUTPUT; RESET TO MAX COUNT
Frequency of 25MHz
CD74HC40103E Applications
There are a lot of Texas Instruments CD74HC40103E Counters & Dividers applications.
- Dual Up Counters
- Frequency dividing circuits
- ALGEBRAIC COMPUTATION
- Signal gating
- Time delay circuits
- Control counters
- DIVISION
- Divide-by-N counting
- Counter control/timers
- Programmable decade counters
