CD74HC40103MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Additional Feature | TCO OUTPUT; RESET TO MAX COUNT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC40103 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 450 ns |
| Quiescent Current | 8μA |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 64 ns |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 18MHz |
| Timing | Synchronous |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC40103MT Overview
16-SOIC (0.154, 3.90mm Width)is a package in which this device is packaged. It is configured using 16terminations. 4.5Vis fully flexible due to its voltage supply. The device has 1terminations. All component pins are equal to 16. Tape & Reel (TR)is the packaging method used for this package. There are 16 pins going on to connect other parts in the circuit. Using [0], it can be mounted. In this case, it belongs to the family of [0]. Having been designed as a member of the 74HCseries, it is well suited to a variety of applications. It is adopted that the logic type is [0]. It is recommended that the operating temperature be set to -55°C~125°C. In this case, it is mounted with a Surface Mounttype. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. It contains 8elements. It is possible for the result to be yesin Pbfree code. It is important to note that in regards to this electronic device, TCO OUTPUT; RESET TO MAX COUNTis an extremely significant feature. The base part number of 74HC40103provides access to more related parts. For its packaging, TRis employed. As a result of the voltage source, there is 2/6V voltage. Supply voltages can be as low as 2V volts (Vsup). It operates with the frequency of 25MHz. There is 6V maximum supply voltage (Vsup) allowed. The device consumes quiescent current when it is at 8μA.
CD74HC40103MT Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
TCO OUTPUT; RESET TO MAX COUNT
Frequency of 25MHz
CD74HC40103MT Applications
There are a lot of Texas Instruments CD74HC40103MT Counters & Dividers applications.
- Time Out Timer for Consumer-Application Industrial Controls
- Dual Up Counters
- Divide-by-N counting
- Counter control/timers
- Divide-by"N" counters/frequency synthesizers
- ALGEBRAIC COMPUTATION
- Time-delay circuits
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- ANALOG SIGNAL PROCESSING
- LINEARIZATION
