CD74HC40105M96E4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 32MHz |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 3.75 μs |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.75 μs |
| Frequency (Max) | 32MHz |
| Output Characteristics | 3-STATE |
| Access Time (Max) | 2250 ns |
| High Level Output Current | -5.2mA |
| Parallel/Serial | PARALLEL |
| Low Level Output Current | 5.2mA |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Output Enable | YES |
| Cycle Time | 500 ns |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC40105M96E4 Overview
You can find FIFO memory chip in the SOIC package.The package comes in a case of Tape and Reel .Surface Mount is memory IC's recommended mounting method.When the supply voltage is 4.5V , high efficiency is possible.The number of terminations in FIFO means is 16 .These are the 16 pins for operation.This FIFO products runs at -55°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 125°C degrees Celsius assures stable operation.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.It is possible to operate the FIFO memory chip at very low supply voltages, such as 2V volts.FIFO memory can handle a maximum supply voltage of 6V V.A total of 16 pins are present on the FIFO memory IC.In the presence of a 32MHz frequency, it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 32MHz .Its enhanced flexibility is achieved with the usage of 1 circuits.
CD74HC40105M96E4 Features
FIFOs category
Frequency at most
CD74HC40105M96E4 Applications
There are a lot of Texas Instruments CD74HC40105M96E4 FIFOs Memory applications.
- Data communications
- Computers
- General Data Collection Applications at Low-Temperatures
- Application that requires re-writable nonvolatile parameter memory
- Event Recorder
- Temporary storage elements
- Medical Monitoring Device
- Code converters
- GPS Offender Tracking
- Queues for communication systems
