CD74HC40105MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 32MHz |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 3.75 μs |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.75 μs |
| Frequency (Max) | 32MHz |
| Access Time (Max) | 2250 ns |
| High Level Output Current | -5.2mA |
| Parallel/Serial | PARALLEL |
| Low Level Output Current | 5.2mA |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Output Enable | YES |
| Cycle Time | 500 ns |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC40105MG4 Overview
SOIC is the package in which FIFO memory chip is contained.It is recommended that memory IC be mounted in the Surface Mount direction.High efficiency is possible with a supply voltage of 4.5V .FIFO consists of 16 terminations, which indicates that FIFO means is empty.16 pins are used for operation.The FIFO products must be run at a minimum temperature of -55°C degrees Celsius to ensure reliability.By operating at 125°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at very low supply voltages, such as 2V volts.An input voltage of 6V V is the maximum that FIFO memory can handle.It has a total of 16 pins on it.With a frequency of 32MHz , it exhibits good accuracy.It is recommended that the FIFO memory's maximum value be set to 32MHz .Through the use of 1 circuits, FIFO memory chip is able to achieve enhanced flexibility.
CD74HC40105MG4 Features
FIFOs category
Frequency at most
CD74HC40105MG4 Applications
There are a lot of Texas Instruments CD74HC40105MG4 FIFOs Memory applications.
- GPS Offender Tracking
- Computer Systems
- Computers
- Seismic Data Collection at Extreme Temperatures
- Network bridges
- Rate buffers
- Analog-to-digital converters
- Thermal Management for DDR3 Memory Modules
- Industrial Systems
- Address mapping
