CD74HC4016M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 170Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 74HC4016 |
| Pin Count | 14 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Max Supply Current | 16μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Input Voltage (Max) | 6V |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 22 ns |
| -3db Bandwidth | 20MHz |
| On-State Resistance (Max) | 170Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 8.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 38ns |
| Switch-off Time-Max | 29ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4016M96 Overview
As the electronic part is packed in 14-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Cut Tape (CT). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -55°C~125°C TA. In total, there have been 14 terminations. Due to its 4 channels, the electrical component produces high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. It is injected into the electrical part body with 14 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Search with 74HC4016 if you are looking for analog multiplexer variants. It has an internal resistance of 170Ohm. You can find the functions of the 14 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 10V. Analogue multiplexers of the Single supply type that are cost-effective. 2V is the lowest voltage the electrical component should receive. An analogue multiplexer drains from a single voltage supply at 2V~10V. It may damage the digital multiplexer if the voltage is higher than 16μA. 200MHz bandwidths enable data to be transferred.
CD74HC4016M96 Features
4 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 20MHz
Bandwidth: 200MHz
CD74HC4016M96 Applications
There are a lot of Texas Instruments CD74HC4016M96 Analog Switches & Multiplexers ICs applications.
- DSUs
- Communication systems
- PDAs
- Fiber In The Loop (FITL)
- Multi-Line E1 Interface Cards
- Frame Relay Equipment
- SONET
- Routers
- Digital cross connects (DSX-1)
- T1/E1 Terminals
