CD74HC4016PW

SPST - NO 170Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74HC4016 14 Pins 100nA 4.5V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4016PW
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 603
Description: SPST - NO 170Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74HC4016 14 Pins 100nA 4.5V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	57.209338mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Termination	SMD/SMT
Resistance	170Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HC4016
Pin Count	14
Qualification Status	Not Qualified
Max Output Current	25mA
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	10V
Min Supply Voltage	2V
Max Supply Current	16μA
Throw Configuration	SPST
Turn On Delay Time	190 ns
Input Voltage (Max)	6V
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	145 ns
-3db Bandwidth	20MHz
On-State Resistance (Max)	170Ohm
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	10Ohm
Switch Circuit	SPST - NO
Channel-to-Channel Matching (ΔRon)	8.5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	38ns
Switch-off Time-Max	29ns
Voltage - Supply, Single (V+)	2V~10V
Normal Position	NO
Signal Current-Max	0.025A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4016PW Overview

Presented in 14-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, this analog switch is mounted. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -55°C~125°C TA. There are 14 terminations totally. Due to its 4 channels, the electrical component produces high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 14 series. These analog multiplexers are built based on SPST - NO switching circuits. Try searching with 74HC4016 to find analog multiplexer variants. It has an internal resistance of 170Ohm. You can find the functions of the 14 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 10V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. 2V should be the lowest voltage fed to the electronic component. A voltage of 2V~10V is required to drain this analog switch from a single voltage supply. A voltage higher than 16μA may cause damage to the switch multiplexer. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths.