CD74HC4020MT
| Parameters | |
|---|---|
| Base Part Number | 74HC4020 |
| Pin Count | 16 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 255 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 35MHz |
CD74HC4020MT Overview
This device is supplied in the 16-SOIC (0.154, 3.90mm Width) package. This configuration uses 16terminations. This device is fully flexible due to the supply voltage of [0]. In this diagram, there are 1elements that are interconnected by wires. A total of 16pins are present on all components. Packaging is based on Tape & Reel (TR). There are 16 pins going on to connect other parts in the circuit. Surface Mountis the way in which it is mounted. In this case, it emerges as a member of the HC/UH family. This device is a member of the 74HCseries and is well suited for a wide range of applications. Binary Counteris selected as the logic type. The operating temperature should be set at -55°C~125°C. A mounting type of Surface Mountis adopted. By providing the supply voltage of [0], it is capable of operating more reliably. The array has 14elements. Based on the Pbfree code, the result may be yes. There are more related parts under the 74HC4020base part number. Its packaging is provided by [0]. In this case, 2/6Vvoltage is generated by the voltage source. Supply voltage (Vsup) can be as low as 2V. It operates at a frequency of 35MHz Hz. A maximum supply voltage (Vsup) is available up to 6V.
CD74HC4020MT Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
14 bits per element
Frequency of 35MHz
CD74HC4020MT Applications
There are a lot of Texas Instruments CD74HC4020MT Counters & Dividers applications.
- Divide-by"N" counters/frequency synthesizers
- Fixed or Programmable Frequency Division
- ALGEBRAIC COMPUTATION
- VHF, UHF, FM, AM, etc.
- LINEARIZATION
- Dual Up Counters
- Timers
- Frequency division
- Fixed and programmable counters greater than 10
- Frequency dividers
