CD74HC4051M96G3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 130Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC4051 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 160μA |
| Propagation Delay | 4 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 130Ohm |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Dual Supply Voltage | 3V |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 5Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 32ns |
| Switch-off Time-Max | 32ns |
| Normal Position | NC |
| Signal Current-Max | 0.025A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4051M96G3 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Around -55°C~125°C TA is the extended operating temperature. The total number of terminations is 16. High-quality output is provided by the electronic component's 1 channels. A 4.5V voltage supply should turn on and run the electronic component. As part of its design, the 16 series is equipped with this electronic component. Circuits number 1 make up this analogue multiplexer. Use 74HC4051 to search for variants of the digital switches. A 130Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. The digital multiplexer has a low cost Dual, Single supply. It is recommended to use 2V as the lowest voltage for the electrical part. 160μA current would be enough for this multiplexer to operate. There is no problem with using dual supply voltage, but it should not exceed 5V. You should attach at least 1V voltage if you are using dual power supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Operating the 8 inputs requires 8 inputs. This switch operates within the bandwidth of 180MHz.
CD74HC4051M96G3 Features
1 Channels
160μA Supply Current
Bandwidth: 180MHz
CD74HC4051M96G3 Applications
There are a lot of Texas Instruments CD74HC4051M96G3 Analog Switches & Multiplexers ICs applications.
- PDAs
- Remote Powered Equipment
- Avionics and Military Systems
- Cell phones
- Multiplexers
- FTTH
- Voice over IP/DSL – Integrated Access Devices, Smart
- Central office
- Public switching systems
- Power routing
