CD74HC4051M96G4
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 130Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC4051 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 16μA |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 225 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 225 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 130Ohm |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Dual Supply Voltage | 3V |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 5Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 32ns |
| Switch-off Time-Max | 32ns |
| Normal Position | NC |
| Signal Current-Max | 0.025A |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
CD74HC4051M96G4 Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. Around -55°C~125°C TA is the extended operating temperature. 16 terminations have been made so far. The electronic part delivers high-quality output through its 1 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 16 pins. There are 1 circuits in this switch device. If you are looking for variants of the digital switch, trying search with 74HC4051. Analog switches have 130Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage fed to the electronic component should be 2V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5V. In the case of dual power supplies, you should connect at least 1V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. The electrical component supports 8 inputs. It is possible to transfer data over a 180MHz-bandwidth.
CD74HC4051M96G4 Features
1 Channels
Bandwidth: 180MHz
CD74HC4051M96G4 Applications
There are a lot of Texas Instruments CD74HC4051M96G4 Analog Switches & Multiplexers ICs applications.
- Modems
- Digital Cross-Connects
- DVD-R
- DSLAMs
- Microwave transmission systems
- Remote Powered Equipment
- Microprocessor Controlled Analog Systems
- PBXs
- Microprocessor controlled systems
- DSUs
