CD74HC4051MM96EP

130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4051MM96EP
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 140
Description: 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HC4051
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	16μA
Max Supply Current	16μA
Propagation Delay	60 ns
Turn On Delay Time	225 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	225 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	25pF
On-state Resistance Match-Nom	5Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	340ns
Switch-off Time-Max	340ns
Normal Position	NC
Signal Current-Max	0.05A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4051MM96EP Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -55°C~125°C TA extended. There are 16 terminations totally. A electrical component with 8 channels is capable of high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the electrical part body. A total of 1 circuits make up this switch device. Using the 74HC4051 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 130Ohm. Datasheets for 16 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 2V. If put voltage greater than 16μA on the device, damage may be caused to the analogue multiplexer. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. You should attach at least 1V voltage if you are using dual power supply. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. In 180MHz-bandwidths, data can be transferred.