CD74HC4051PWR

130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4051PWR
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 945
Description: 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	130Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HC4051
Pin Count	16
Max Output Current	25mA
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	16μA
Propagation Delay	60 ns
Turn On Delay Time	225 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	225 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	25pF
On-state Resistance Match-Nom	5Ohm
Channel-to-Channel Matching (ΔRon)	8.5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	32ns
Switch-off Time-Max	32ns
Drain to Source Resistance	40Ohm
Normal Position	NC
Signal Current-Max	0.025A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4051PWR Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Cut Tape (CT). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 8:1. Operation at a temperature around -55°C~125°C TA. The total number of terminations is 16. The electronic part provides high-quality output because it has 1 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits number 1 make up this analogue multiplexer. 74HC4051 can be used to search for analog multiplexer variants. An switch multiplexer with 130Ohm internal resistance has a value of 130Ohm. Datasheets for 16 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2V. There is no problem with using dual supply voltage, but it should not exceed 5V. With dual power supplies, you should attach at least 1V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. A 8 input needs to be operated. There are various bandwidths available for data transfer. There is 40Ohm resistance between the Drain and Source on this part.