CD74HC4051PWRG4

130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4051PWRG4
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 644
Description: 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HC4051
Pin Count	16
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	16μA
Propagation Delay	60 ns
Turn On Delay Time	225 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	225 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	25pF
On-state Resistance Match-Nom	5Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	32ns
Switch-off Time-Max	32ns
Normal Position	NC
Signal Current-Max	0.025A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4051PWRG4 Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Extended operating temperature around -55°C~125°C TA. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 16 series. This multiplexer is composed of 1 circuits. Try searching for the analog switch ic with 74HC4051 if you are looking for variants. The internal resistance of this digital multiplexer is 130Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 2V. Despite this switch device's dual supply capability, its voltage should not exceed 5V. The voltage should be at least 1V if you are using dual power supplies. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. The electrical component supports 8 inputs. There are various bandwidths available for data transfer.