CD74HC4051PWT

130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4051PWT
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 981
Description: 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HC4051
Pin Count	16
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	160μA
Nominal Supply Current	16μA
Propagation Delay	4 ns
Turn On Delay Time	40 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	40 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	25pF
On-state Resistance Match-Nom	5Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	32ns
Switch-off Time-Max	32ns
Normal Position	NC
Signal Current-Max	0.025A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active

CD74HC4051PWT Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). This analog switch is mounted in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Temperatures around -55°C~125°C TA are extended for operation. In total, there are 16 terminations. The electronic part provides high-quality output because it has 1 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 16 series. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with 74HC4051. An switch multiplexer with 130Ohm internal resistance has a value of 130Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 6V. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 160μA current. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5V. A dual power supply should have at least 1V voltage attached. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. Operating the 8 inputs requires 8 inputs. In 180MHz-bandwidths, data can be transferred.