CD74HC4051PWTG4
| Parameters | |
|---|---|
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 225 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 130Ohm |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Dual Supply Voltage | 3V |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 400nA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 5Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 32ns |
| Switch-off Time-Max | 32ns |
| Normal Position | NC |
| Signal Current-Max | 0.025A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Resistance | 130Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC4051 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 16μA |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 225 ns |
CD74HC4051PWTG4 Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 8:1. Operational temperature extended around -55°C~125°C TA. In total, there have been 16 terminations. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the body of the electronic part. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with 74HC4051. Internally, this switch multiplexer has a resistance of 130Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 6V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. 2V is the lowest voltage the electrical component should receive. Despite this switch device's dual supply capability, its voltage should not exceed 5V. If you are using dual power supplies, you should attach at least 1V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. The electrical component supports 8 inputs. 180MHz bandwidths enable data to be transferred.
CD74HC4051PWTG4 Features
1 Channels
Bandwidth: 180MHz
CD74HC4051PWTG4 Applications
There are a lot of Texas Instruments CD74HC4051PWTG4 Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- Access Concentrators
- Fiber In The Loop (FITL)
- Video switching
- Multi-Line E1 Interface Cards
- CSU
- Intelligent PBX
- Microprocessor Controlled Analog Systems
- High reliability control systems
- Transmit
