CD74HC4051QM96Q1

130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4051QM96Q1
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 557
Description: 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.294023mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HC4051
Pin Count	16
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	16μA
Nominal Supply Current	16μA
Propagation Delay	60 ns
Turn On Delay Time	255 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Supply Current-Max (Isup)	0.32mA
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	255 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	25pF
On-state Resistance Match-Nom	5Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	340ns
Switch-off Time-Max	340ns
Normal Position	NC
Signal Current-Max	0.025A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4051QM96Q1 Overview

The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Around -40°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. By its 8 channels, the electronic component provides high-quality output. A 4.5V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with 74HC4051. This digital multiplexer has 130Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 6V. The digital multiplexer has a low cost Dual, Single supply. 2V is the lowest voltage the electrical component should receive. For this multiplexer to operate, 16μA current would be sufficient. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. In the case of dual power supplies, you should connect at least 1V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Operating 8 inputs is required. The transfer of data can be performed over 180MHz bandwidths. The Automotive, AEC-Q100 series is responsible for it.