CD74HC4051QPWRG4Q1

130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4051QPWRG4Q1
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 264
Description: 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4051 16 Pins 400nA 4.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HC4051
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	16μA
Propagation Delay	8 ns
Turn On Delay Time	225 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Supply Current-Max (Isup)	0.32mA
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	225 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	25pF
On-state Resistance Match-Nom	5Ohm
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	340ns
Switch-off Time-Max	340ns
Normal Position	NC
Signal Current-Max	0.025A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4051QPWRG4Q1 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operating temperature around -40°C~125°C TA extended. In total, there have been 16 terminations. By its 8 channels, the electronic component provides high-quality output. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. Into the electrical component body are injected 16 pins. This multiplexer is composed of 1 circuits. Try searching with 74HC4051 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 130Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 2V. The switch device would be able to operate with 16μA current. There is no problem with using dual supply voltage, but it should not exceed 5V. If you are using dual power supplies, you should attach at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. It is possible to operate 8 inputs. 180MHz bandwidths enable data to be transferred. It belongs to the series Automotive, AEC-Q100.