CD74HC4052E

SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4052 16 Pins 200nA 4.5V 16-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4052E
Package: 16-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 158
Description: SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4052 16 Pins 200nA 4.5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	951.693491mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Number of Functions	1
Supply Voltage	4.5V
Frequency	185MHz
Base Part Number	74HC4052
Output	COMMON OUTPUT
Pin Count	16
Polarity	Non-Inverting
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	16μA
Number of Bits	4
Propagation Delay	60 ns
Turn On Delay Time	325 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	185MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	12pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	80Ohm
Normal Position	NC
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4052E Overview

Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. To ensure high reliability, a new packaging method Tube is used. Mounted in Through Hole is this multiplexer. There is 4:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -55°C~125°C TA. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. Turning on and running the electrical part should be easy with a 4.5V voltage supply. A total of 16 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Try searching for 74HC4052 variants of the analog switch ic. There is 130Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. Dual, Single supply type digital switch with a low cost. It is recommended to use 2V as the lowest voltage for the electrical part. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5V. It is recommended that you attach at least 1V to your dual power supply. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. The digital multiplexer has COMMON OUTPUT outputs that can be used. The data can be transferred over a wide range of bandwidths, called 185MHz bandwidths. It has a Drain to Source resistance of 80Ohm ohms. It is able to conduct in a 4-bit way.