CD74HC4052M96G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 130Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC4052 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Nominal Supply Current | 16μA |
| Number of Bits | 4 |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 325 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 185MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 130Ohm |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Dual Supply Voltage | 3V |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 67 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4052M96G4 Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. Around -55°C~125°C TA is the extended operating temperature. There are 16 terminations totally. By its 8 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 4.5V voltage supply. Electronic part bodies are injected with 16 pins. These analog multiplexers are built based on SP4T switching circuits. It consists of 2 circuits. Try searching for 74HC4052 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 130Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. A analog switch ic that has a cost-effective Dual, Single supply type. The lowest voltage the electronic part should receive is 2V. Despite this switch device's dual supply capability, its voltage should not exceed 5V. A dual power supply should have at least 1V voltage attached. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. In 185MHz-bandwidths, data can be transferred. It is able to conduct in a 4-bit way.
CD74HC4052M96G4 Features
8 Channels
Switch Circuit: SP4T
Bandwidth: 185MHz
4-Bit
CD74HC4052M96G4 Applications
There are a lot of Texas Instruments CD74HC4052M96G4 Analog Switches & Multiplexers ICs applications.
- DSUs
- E1 Network Equipment
- SONET/SDH ADM
- Precision test equipment
- Cross Connects
- Isolation
- High reliability control systems
- Medical
- Audio signal routing
- Microprocessor controlled systems
