CD74HC4052ME4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 130Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Temperature Grade | MILITARY |
| Number of Channels | 8 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Nominal Supply Current | 16μA |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 325 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Bandwidth | 185MHz |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 5V |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
| Dual Supply Voltage | 3V |
| Low Level Output Current | 25mA |
| Off-state Isolation-Nom | 65 dB |
| On-state Resistance Match-Nom | 5Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC4052ME4 Overview
Shipping overseas is convenient with the electronic component packed in SOIC. In order to provide high reliability, an advanced packaging method Rail/Tube is used. Total terminations are 16. A electrical component with 8 channels is capable of high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 16 series. The internal resistance of this digital multiplexer is 130Ohm. Datasheets for 16 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 2V. Despite this switch's dual supply capability, its voltage should not exceed 5V. The voltage should be at least 1V if you are using dual power supplies. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. In 185MHz-bandwidths, data can be transferred. Temperatures above 125°C should not be used to operate the switches. In this digital multiplexer, there are 2 outputs. 4-bit operation is possible.
CD74HC4052ME4 Features
8 Channels
Bandwidth: 185MHz
4-Bit
CD74HC4052ME4 Applications
There are a lot of Texas Instruments CD74HC4052ME4 Analog Switches & Multiplexers ICs applications.
- DVD-R
- SONET
- Central office
- Imaging
- Industrial and process control systems
- Optical Applications
- Communication systems
- Audio and video switching
- Communication systems
- Industrial
