CD74HC4052NSRG4

SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4052 16 Pins 200nA 4.5V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4052NSRG4
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: -
Stock: 118
Description: SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4052 16 Pins 200nA 4.5V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Weight	200.686274mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	130Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HC4052
Output	COMMON OUTPUT
Pin Count	16
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	16μA
Number of Bits	4
Propagation Delay	4 ns
Turn On Delay Time	325 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	185MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	67 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	12pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	2mm
Length	10.3mm
Width	5.3mm
Thickness	1.95mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4052NSRG4 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.209, 5.30mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Around -55°C~125°C TA is the extended operating temperature. There are 16 terminations totally. A high-quality output is provided by the electrical component's 8 channels. A 4.5V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 16 series. Circuits based on SP4T switching are used to construct these analog switch ics. It consists of 2 circuits. Use 74HC4052 to search for variants of the digital switches. As far as internal resistance is concerned, it has 130Ohm. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 2V. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. You should attach at least 1V voltage if you are using dual power supply. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. The digital multiplexer has COMMON OUTPUT outputs that can be used. This switch operates within the bandwidth of 185MHz. It is able to conduct in a 4-bit way.