CD74HC4052PW

SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4052 16 Pins 200nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4052PW
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 600
Description: SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4052 16 Pins 200nA 4.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HC4052
Pin Count	16
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	16μA
Number of Bits	4
Throw Configuration	4PST
Propagation Delay	60 ns
Turn On Delay Time	325 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	185MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	12pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	80Ohm
Normal Position	NC
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)

CD74HC4052PW Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Operation at a temperature around -55°C~125°C TA. In total, there are 16 terminations. The electronic part delivers high-quality output through its 8 channels. Turning on and running the electrical part should be easy with a 4.5V voltage supply. An electrical component like this is included in the 16 series. A SP4T switching circuit is used for these analog switches. 2 circuits are used in this analogue multiplexer. Use 74HC4052 to search for variants of the digital switches. Analog switches have 130Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 2V should be applied to the electronic component. For this switch, a dual supply voltage is feasible, but it must not exceed 5VWith dual power supplies, you should attach at least 1V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. It is possible to transfer data over a 185MHz-bandwidth. There is 80Ohm resistance between the Drain and Source on this part. It is able to conduct in a 4-bit way.