CD74HC4052PWT

SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4052 16 Pins 200nA 4.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4052PWT
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 253
Description: SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4052 16 Pins 200nA 4.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	61.887009mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Termination	SMD/SMT
Resistance	180Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HC4052
Pin Count	16
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	16μA
Number of Bits	4
Throw Configuration	4PST
Propagation Delay	60 ns
Turn On Delay Time	325 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	185MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	250 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	12pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold

CD74HC4052PWT Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Temperatures around -55°C~125°C TA are extended for operation. A total of 16 terminations have been recorded. By its 8 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 4.5V voltage supply. The electronic part body is injected with 16 pins. Multiplexers built on a SP4T switching circuit are built. A 2 circuit is present in this switch device. 74HC4052 can be used to search for analog multiplexer variants. This digital multiplexer has 180Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 2V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5V. In the case of dual power supplies, you should connect at least 1V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. In 185MHz-bandwidths, data can be transferred. It conducts in a 4-bit manner.