CD74HC4053M

SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4053M
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 680
Description: SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	4.5V
Base Part Number	74HC4053
Pin Count	16
Polarity	Non-Inverting
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	160μA
Nominal Supply Current	16μA
Propagation Delay	4 ns
Turn On Delay Time	39 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	36 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	8pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	160Ohm
Normal Position	NC
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4053M Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tube. Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -55°C~125°C TA. 16 terminations have been made so far. The electronic part delivers high-quality output through its 2 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. It is injected into the electrical part body with 16 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 3 circuits in this multiplexer. Look for analog switch ic variants by searching with 74HC4053. It has an internal resistance of 130Ohm. Please refer to the datasheets for 16 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Dual, Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 2V. It would be sufficient to run this analogue multiplexer with 160μA current. There is no problem with using dual supply voltage, but it should not exceed 5V. If you are using a dual power supply, you should attach at least 1V. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. In order to operate the 6 inputs, there are several steps to follow. There are various bandwidths available for data transfer. There is 160Ohm resistance between the Drain and Source on this part.