CD74HC4053M96

SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4053M96
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 345
Description: SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	4.5V
Base Part Number	74HC4053
Pin Count	16
Polarity	Non-Inverting
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	160μA
Nominal Supply Current	16μA
Propagation Delay	4 ns
Turn On Delay Time	39 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	36 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	8pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	130mOhm
Normal Position	NC
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4053M96 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature around -55°C~125°C TA extended. The total number of terminations is 16. As a result of its 2 channels, this electronic component provides high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 16 pins. These analog multiplexers are built based on SPDT switching circuits. This multiplexer is composed of 3 circuits. Look for analog switch ic variants by searching with 74HC4053. A 130Ohm internal resistance characterizes this multiplexer. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 160μA current. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 1V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. Operating 6 inputs is required. The transfer of data can be performed over 200MHz bandwidths. There is 130mOhm resistance between Drain and Source for this electronic part.