CD74HC4053M96G3

SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4053M96G3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 326
Description: SPDT 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4053 16 Pins 100nA 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HC4053
Pin Count	16
Number of Channels	2
Number of Circuits	3
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	160μA
Propagation Delay	4 ns
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	66 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	8pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPDT
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4053M96G3 Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. The total number of terminations is 16. High-quality output is provided by the electronic component's 2 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. 16 pins are injected to the electronic part body. A SPDT switching circuit is used for these analog switches. This multiplexer is composed of 3 circuits. Try searching for 74HC4053 variants of the analog switch ic. As far as internal resistance is concerned, it has 130Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 6V. Dual, Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 2V. The switch device would be able to operate with 160μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. If you are using dual power supplies, you should attach at least 1V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. The 6 inputs need to be operated in order to work. A 200MHz-bandwidth can be used for data transfer.