Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Termination |
SMD/SMT |
Resistance |
180Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
4.5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74HC4053 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Number of Channels |
2 |
Number of Circuits |
3 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Nominal Supply Current |
16μA |
Throw Configuration |
DPST |
Propagation Delay |
60 ns |
Turn On Delay Time |
220 ns |
Logic Function |
Demultiplexer, Multiplexer |
Input Voltage (Max) |
6V |
Number of Inputs |
6 |
Voltage - Supply, Single/Dual (±) |
2V~6V ±1V~5V |
Supply Type |
Dual, Single |
Bandwidth |
200MHz |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
210 ns |
Max Dual Supply Voltage |
5V |
On-State Resistance (Max) |
130Ohm |
Min Dual Supply Voltage |
1V |
High Level Output Current |
25mA |
Dual Supply Voltage |
3V |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
64 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
8pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SPDT |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HC4053MT Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. An extended operating temperature of -55°C~125°C TA degrees Celsius. 16 terminations have been made so far. This electronic part offers high-quality output due to its 2 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. This electrical component is included in the 16 series of products. A SPDT switching circuit is used for these analog switches. This multiplexer is composed of 3 circuits. Try searching with 74HC4053 if you're looking for variants. As far as internal resistance is concerned, it has 180Ohm. Datasheets for functions of 16 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. A low voltage of 2V should be applied to the electronic component. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. A dual power supply should have at least 1V voltage attached. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Operating the 6 inputs requires 6 inputs. In 200MHz-bandwidths, data can be transferred.
CD74HC4053MT Features
2 Channels
Switch Circuit: SPDT
Bandwidth: 200MHz
CD74HC4053MT Applications
There are a lot of Texas Instruments CD74HC4053MT Analog Switches & Multiplexers ICs applications.
- DSLAMs
- CSU
- Data Acquisition Systems
- SONET
- Modems
- Power routing
- Multi-Line E1 Interface Cards
- Video switching
- Switching Systems
- Frame Relay Equipment