CD74HC4066M

SPST - NO 70Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74HC4066 14 Pins 100nA 4.5V 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4066M
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 947
Description: SPST - NO 70Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74HC4066 14 Pins 100nA 4.5V 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	129.387224mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	70Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Base Part Number	74HC4066
Pin Count	14
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	10V
Min Supply Voltage	2V
Max Supply Current	16μA
Throw Configuration	SPST
Turn On Delay Time	100 ns
Input Voltage (Min)	2V
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	150 ns
On-State Resistance (Max)	70Ohm
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-72dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	30ns
Voltage - Supply, Single (V+)	2V~10V
Drain to Source Resistance	25Ohm
Normal Position	NO
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4066M Overview

This electronic part is conveniently packaged in 14-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Increasing operating temperature to around -55°C~125°C TA. The total number of terminations is 14. By its 4 channels, the electronic component provides high-quality output. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. It is part of the design of the 14 series that this electronic component is included. A SPST - NO switching circuit is used to build these analog multiplexers. Search with 74HC4066 if you are looking for analog multiplexer variants. Analog switches have 70Ohm internal resistance. For details about the functions of 14 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 10V in normal situations. An effective Single supply digital multiplexer. 2V is the lowest voltage the electrical component should receive. Using a single voltage supply, this switch device consumes 2V~10V volts. It may damage the digital multiplexer if the voltage is higher than 16μA. This switch operates within the bandwidth of 200MHz. Drain to Source resistance for this electronic component is 25Ohm.