CD74HC4066ME4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 70Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC4066 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Max Supply Current | 16μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 100 ns |
| Input Voltage (Min) | 2V |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 150 ns |
| On-State Resistance (Max) | 70Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -72dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Normal Position | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4066ME4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. The operating temperature is extended to around -55°C~125°C TA. In total, there have been 14 terminations. By its 4 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 4.5V voltage supply. As part of its design, the 14 series is equipped with this electronic component. Multiplexers built on a SPST - NO switching circuit are built. Look for analog switch ic variants by searching with 74HC4066. There is 70Ohm internal resistance in this digital multiplexer. To find out what the functions of 14 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 10V to a switch device. Digital switch that provides Single power at a cost-effective price. 2V should be the lowest voltage fed to the electronic component. This analogue multiplexer requires a voltage of 2V~10V when it drains from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 16μA. There are various bandwidths available for data transfer.
CD74HC4066ME4 Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
CD74HC4066ME4 Applications
There are a lot of Texas Instruments CD74HC4066ME4 Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Avionics and Military Systems
- Transmit
- Battery Powered Systems
- Data switching
- Video switching
- Microprocessor controlled systems
- Isolation
- Microprocessor Controlled Analog Systems
- Precision instrumentation
