CD74HC4066PWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 70Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC4066 |
| Pin Count | 14 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Max Supply Current | 16μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 100 ns |
| Input Voltage (Min) | 2V |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 150 ns |
| On-State Resistance (Max) | 70Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 1Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -72dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 2V~10V |
| Normal Position | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4066PWG4 Overview
Shipping overseas is convenient with the electronic component packed in 14-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -55°C~125°C TA. There are 14 terminations totally. High-quality output is provided by the electronic component's 4 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. A total of 14 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Using the 74HC4066 search parameter, you can discover variants of the switch. A 70Ohm internal resistance characterizes this multiplexer. You can find the functions of the 14 pins in the datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 10V in normal situations. Single supply type digital switch with a low cost. 2V should be the lowest voltage fed to the electronic component. A voltage of 2V~10V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 16μA. In 200MHz-bandwidths, data can be transferred.
CD74HC4066PWG4 Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
CD74HC4066PWG4 Applications
There are a lot of Texas Instruments CD74HC4066PWG4 Analog Switches & Multiplexers ICs applications.
- SONET
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- USB 1.1 signal switching circuits
- Residential Gateways, Home Gateway/Router
- Relay replacements
- T1/E1 Terminals
- Audio signal routing
- Video switching
- Precision instrumentation
- Wireless Local Loop
