Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Number of Pins |
24 |
Weight |
624.398247mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Resistance |
160Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Frequency |
89MHz |
Base Part Number |
74HC4067 |
Pin Count |
24 |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
8μA |
Nominal Supply Current |
8μA |
Propagation Delay |
6 ns |
Turn On Delay Time |
64 ns |
Logic Function |
Demultiplexer, Multiplexer |
Input Voltage (Max) |
6V |
Number of Inputs |
16 |
Supply Type |
Single |
Bandwidth |
89MHz |
Supply Current-Max (Isup) |
0.08mA |
Turn-Off Delay Time |
62 ns |
On-State Resistance (Max) |
160Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
800nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 50pF |
On-state Resistance Match-Nom |
10Ohm |
Switch Time (Ton, Toff) (Max) |
51ns, 49ns |
Channel-to-Channel Matching (ΔRon) |
8.5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
60ns |
Switch-off Time-Max |
58ns |
Voltage - Supply, Single (V+) |
2V~6V |
Drain to Source Resistance |
90Ohm |
Signal Current-Max |
0.025A |
Height |
2.65mm |
Length |
15.4mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HC4067M Overview
Shipping overseas is convenient due to the electrical component's packing in 24-SOIC (0.295, 7.50mm Width). The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 16:1. Temperatures around -55°C~125°C TA are extended for operation. 24 terminations have been made so far. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 24 series. A total of 1 circuits make up this switch device. Search with 74HC4067 if you are looking for analog multiplexer variants. An switch multiplexer with 160Ohm internal resistance has a value of 160Ohm. Please refer to the datasheets for 24 pins functions. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 6V to a switch device. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 8μA current. This analogue multiplexer requires a voltage of 2V~6V when it drains from a single voltage supply. Operating the 16 inputs requires 16 inputs. There are 89MHz bandwidths for data transfer. Resistivity from Drain to Source is 90Ohm for this electronic part.
CD74HC4067M Features
1 Channels
8μA Supply Current
Bandwidth: 89MHz
Drain-to-Source resistance: 90Ohm
CD74HC4067M Applications
There are a lot of Texas Instruments CD74HC4067M Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Industrial
- Optical Applications
- Audio/video switches
- Automatic test equipment
- Channelized and Unchannelized DS3 applications
- DSLAMs
- Public switching systems
- Video signal routing
- CSU