Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Number of Pins |
24 |
Weight |
624.398247mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Resistance |
180Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Base Part Number |
74HC4067 |
Pin Count |
24 |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
8μA |
Nominal Supply Current |
8μA |
Propagation Delay |
6 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
300 ns |
Logic Function |
Demultiplexer, Multiplexer |
Input Voltage (Max) |
6V |
Number of Inputs |
16 |
Supply Type |
Single |
Bandwidth |
89MHz |
Supply Current-Max (Isup) |
0.08mA |
Turn-Off Delay Time |
290 ns |
On-State Resistance (Max) |
160Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
800nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 50pF |
On-state Resistance Match-Nom |
10Ohm |
Switch Time (Ton, Toff) (Max) |
51ns, 49ns |
Channel-to-Channel Matching (ΔRon) |
8.5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
60ns |
Switch-off Time-Max |
58ns |
Voltage - Supply, Single (V+) |
2V~6V |
Max Junction Temperature (Tj) |
150°C |
Drain to Source Resistance |
180Ohm |
Ambient Temperature Range High |
125°C |
Signal Current-Max |
0.025A |
Height |
2.65mm |
Length |
15.4mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HC4067M96 Overview
Shipping overseas is convenient due to the electrical component's packing in 24-SOIC (0.295, 7.50mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Operational temperature extended around -55°C~125°C TA. In total, 24 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 24 pins. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with 74HC4067. A 180Ohm internal resistance characterizes this multiplexer. The datasheets for the 24 pins explain the functions. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. The digital multiplexer has a low cost Single supply. 2V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 8μA. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V. There are 16 inputs to be operated. 89MHz bandwidths enable data to be transferred. This electronic component presents a Drain to Source resistance of 180Ohm.
CD74HC4067M96 Features
1 Channels
8μA Supply Current
Bandwidth: 89MHz
Drain-to-Source resistance: 180Ohm
CD74HC4067M96 Applications
There are a lot of Texas Instruments CD74HC4067M96 Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Channel Banks
- ISDN NT1/TA
- Mechanical reed relay replacement
- Switching Systems
- Imaging
- Fault Tolerant Systems
- Cross Connects
- Sample hold systems
- PDH Multiplexers