CD74HC4067M96G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 620.004071mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 160Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC4067 |
| Pin Count | 24 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 8μA |
| Nominal Supply Current | 8μA |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 16 |
| Supply Type | Single |
| Bandwidth | 89MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Turn-Off Delay Time | 290 ns |
| On-State Resistance (Max) | 160Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 800nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 51ns, 49ns |
| Channel-to-Channel Matching (ΔRon) | 8.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 58ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.025A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4067M96G4 Overview
The electronic component is convenient to ship overseas because it is packed in a 24-SOIC (0.295, 7.50mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 16:1. The operating temperature is extended to around -55°C~125°C TA. There are 24 terminations totally. As a result of its 1 channels, this electronic component provides high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 24 series. It consists of 1 circuits. Try searching for 74HC4067 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 160Ohm. For functions related to 24 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 6V. A cost-effective Single supply type analogue multiplexer. 2V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 8μA current would suffice. Analogue multiplexers require a 2V~6V voltage to drain from a single voltage supply. There are 16 inputs to be operated. A 89MHz-bandwidth can be used for data transfer.
CD74HC4067M96G4 Features
1 Channels
8μA Supply Current
Bandwidth: 89MHz
CD74HC4067M96G4 Applications
There are a lot of Texas Instruments CD74HC4067M96G4 Analog Switches & Multiplexers ICs applications.
- PBXs
- MP3 players
- Medical systems
- Precision instrumentation
- SDH/SONET multiplexers
- Automotive applications
- Precision data acquisition
- Avionics test equipment
- Precision test equipment
- Avionics and Military Systems
