Parameters |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
8μA |
Nominal Supply Current |
8μA |
Propagation Delay |
13 ns |
Turn On Delay Time |
300 ns |
Logic Function |
Demultiplexer, Multiplexer |
Input Voltage (Max) |
6V |
Number of Inputs |
16 |
Supply Type |
Single |
Bandwidth |
89MHz |
Supply Current-Max (Isup) |
0.08mA |
Turn-Off Delay Time |
290 ns |
On-State Resistance (Max) |
160Ohm |
High Level Output Current |
25mA |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
16:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
800nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 50pF |
On-state Resistance Match-Nom |
10Ohm |
Switch Time (Ton, Toff) (Max) |
51ns, 49ns |
Channel-to-Channel Matching (ΔRon) |
8.5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
60ns |
Switch-off Time-Max |
58ns |
Voltage - Supply, Single (V+) |
2V~6V |
Signal Current-Max |
0.025A |
Height |
2mm |
Length |
8.2mm |
Width |
5.3mm |
Thickness |
1.95mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SSOP (0.209, 5.30mm Width) |
Number of Pins |
24 |
Weight |
172.39345mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Resistance |
160Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74HC4067 |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Number of Channels |
1 |
CD74HC4067SM96E4 Overview
Presented in 24-SSOP (0.209, 5.30mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. 16:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -55°C~125°C TA. There are 24 terminations totally. High-quality output is provided by the electronic component's 1 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. An electrical component like this is included in the 24 series. A 1 circuit is present in this switch device. 74HC4067 can be used to search for analog multiplexer variants. Analog switches have 160Ohm internal resistance. Datasheets for 24 pin functions are available upon request. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. A analog switch ic that has a cost-effective Single supply type. There should be 2V voltage fed to the electrical part below 2V. This multiplexer would work with 8μA current. Using a single voltage supply, this switch device consumes 2V~6V volts. The electrical component supports 16 inputs. It is possible to transfer data over a 89MHz-bandwidth.
CD74HC4067SM96E4 Features
1 Channels
8μA Supply Current
Bandwidth: 89MHz
CD74HC4067SM96E4 Applications
There are a lot of Texas Instruments CD74HC4067SM96E4 Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- Ultrasound
- Precision data acquisition
- Audio and video routing
- T1/E1 Terminals
- Automatic test equipment
- PCMCIA cards
- Medical systems
- Residential Gateways, Home Gateway/Router
- Precision instrumentation