CD74HC4067SM96G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 170.01209mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 160Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC4067 |
| Pin Count | 24 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 8μA |
| Nominal Supply Current | 8μA |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Input Voltage (Max) | 6V |
| Number of Inputs | 16 |
| Supply Type | Single |
| Bandwidth | 89MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Turn-Off Delay Time | 290 ns |
| On-State Resistance (Max) | 160Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 800nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 51ns, 49ns |
| Channel-to-Channel Matching (ΔRon) | 8.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 58ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.025A |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4067SM96G4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 24-SSOP (0.209, 5.30mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. 16:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -55°C~125°C TA. 24 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. With a 4.5V voltage supply, the electrical component should be turned on and run. It is part of the design of the 24 series that this electronic component is included. The multiplexer consists of 1 circuits. Try searching for the analog switch ic with 74HC4067 if you are looking for variants. In this multiplexer, the internal resistance is 160Ohm. To find out what the functions of 24 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 2V. The analogue multiplexer could operate on 8μA current. An analogue multiplexer drains from a single voltage supply at 2V~6V. In order to operate the 16 inputs, there are several steps to follow. In 89MHz-bandwidths, data can be transferred.
CD74HC4067SM96G4 Features
1 Channels
8μA Supply Current
Bandwidth: 89MHz
CD74HC4067SM96G4 Applications
There are a lot of Texas Instruments CD74HC4067SM96G4 Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Communication systems
- Sample-and-hold systems
- Optical Applications
- Audio and video switching
- Voice over IP/DSL – Integrated Access Devices, Smart
- Intelligent PBX
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Medical Instrumentation
- Audio and video routing
