CD74HC42E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Decoder |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC42 |
| Number of Outputs | 10 |
| Number of Elements | 1 |
| Circuit | 1 x 4:10 |
| Polarity | Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 10 |
| Propagation Delay | 225 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 225 ns |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 4 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 4 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 10 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC42E Overview
Due to the fact that it is provided in the 16-DIP (0.300, 7.62mm), digital switch allows the board to be compacted.It is packaged according to the Tube method.For mounting, digital switch ic uses the method Through Hole.the multiplexers uses IC Decoder as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.These multiplexers are members of the 74HC series, which provide extensive application potential.In addition, it also has a base part number of 74HC42, which can be used to find related parts.This supply type employs Single.The board is configured with 16 pins.As you can see, it is mounted in the direction of Through Hole.There are 10 bits in signal multiplexer.As part of the operation of this turn signal switch, there are 10 outputs.Despite not interacting with external factors, it consumes 8μA current of multiplexer ic.A multiplexer such as this has 4 inputs available.It is possible to accept voltage levels by using one of the 4 input lines of multiplexers.As the signal source, there are 10 output lines.A total of 1 transmission channels are available in the turn signal switch's circuit.It is acceptable for this signal switch to operate at the maximal temperature of 125°C.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -55°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 6V.The digital swith is specified to operate at the minimum supply voltage of 2V in compliance with the applicable device specification.A configuration element for the mux switch consists of 1 elements.
CD74HC42E Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
4 input lines
10 output lines
CD74HC42E Applications
There are a lot of Texas Instruments CD74HC42E Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Robotic vehicles
- Medical industry
- Transmission from the computer system of a satellite
- Data demultiplexing
- Decimal decoder
- Code converters
- Electronically controlled engine system
- High-performance memory-decoding applications
- Computer memory
