CD74HC4316E

37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4316 16 Pins 100nA 4.5V 16-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4316E
Package: 16-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 145
Description: 37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4316 16 Pins 100nA 4.5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Weight	951.693491mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	170Ohm
Additional Feature	ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY
Subcategory	Multiplexer or Switches
Technology	CMOS
Number of Functions	4
Supply Voltage	4.5V
Base Part Number	74HC4316
Pin Count	16
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	6V
Min Supply Voltage	2V
Max Supply Current	16μA
Throw Configuration	SPST
Turn On Delay Time	47 ns
Logic Function	Level Shifter
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	47 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	170Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	37ns, 37ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	45Ohm
Normal Position	NO
Signal Current-Max	0.025A
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4316E Overview

The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -55°C~125°C TA is the extended operating temperature. A total of 16 terminations have been recorded. A electrical component with 4 channels is capable of high-quality output. A 4.5V voltage supply should turn on and run the electronic component. 16 pins are injected to the electronic part body. Unlike digital switches, these are based on SPST - NO switching circuits. Search with 74HC4316 if you are looking for analog multiplexer variants. The internal resistance of this digital multiplexer is 170Ohm. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 6V should not normally be supplied to the switches. Dual, Single supply type digital switch with a low cost. A low voltage of 2V should be applied to the electronic component. Put voltage above 16μA on the multiplexer to cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. You should attach at least 1V voltage if you are using dual power supply. There are various bandwidths available for data transfer. Don't forget the additional features of this electronic part, such as: ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY. Drain to Source resistance is 45Ohm.

CD74HC4316E Features

4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
Additional Features: ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY
Drain-to-Source resistance: 45Ohm