Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
170Ohm |
Additional Feature |
ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
4.5V |
Terminal Pitch |
1.27mm |
Base Part Number |
74HC4316 |
Pin Count |
16 |
Polarity |
Non-Inverting |
Number of Channels |
4 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Max Supply Current |
16μA |
Throw Configuration |
SPST |
Turn On Delay Time |
205 ns |
Input Voltage (Max) |
6V |
Voltage - Supply, Single/Dual (±) |
2V~6V ±1V~5V |
Supply Type |
Dual, Single |
Bandwidth |
200MHz |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
205 ns |
Max Dual Supply Voltage |
5V |
On-State Resistance (Max) |
170Ohm |
Min Dual Supply Voltage |
1V |
High Level Output Current |
25mA |
Dual Supply Voltage |
3V |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
37ns, 37ns |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NO |
Signal Current-Max |
0.025A |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HC4316M96G4 Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C TA. In total, there have been 16 terminations. High-quality output is provided by the electronic component's 4 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. A total of 16 pins are injected into the electrical part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. Search with 74HC4316 if you are looking for analog multiplexer variants. It has an internal resistance of 170Ohm. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. Digital switch that provides Dual, Single power at a cost-effective price. 2V should be the lowest voltage fed to the electronic component. The switch multiplexer may be damaged if it is exposed to voltage greater than 16μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. With dual power supplies, you should attach at least 1V. This switch operates within the bandwidth of 200MHz. Check out the electrical component's additional features, such as the following: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY.
CD74HC4316M96G4 Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
Additional Features: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
CD74HC4316M96G4 Applications
There are a lot of Texas Instruments CD74HC4316M96G4 Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- USB 1.1 signal switching circuits
- Microwave transmission systems
- Audio and video switching
- E1 Network Equipment
- Modems
- Private Branch Exchange (PBX)
- Fiber In The Loop (FITL)
- Switching Systems
- Access Concentrators