Parameters |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
170Ohm |
Additional Feature |
ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
4.5V |
Terminal Pitch |
1.27mm |
Base Part Number |
74HC4316 |
Pin Count |
16 |
Polarity |
Non-Inverting |
Number of Channels |
4 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Max Supply Current |
16μA |
Throw Configuration |
SPST |
Turn On Delay Time |
205 ns |
Input Voltage (Max) |
6V |
Voltage - Supply, Single/Dual (±) |
2V~6V ±1V~5V |
Supply Type |
Dual, Single |
Bandwidth |
200MHz |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
205 ns |
Max Dual Supply Voltage |
5V |
On-State Resistance (Max) |
170Ohm |
Min Dual Supply Voltage |
1V |
High Level Output Current |
25mA |
Dual Supply Voltage |
3V |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
37ns, 37ns |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NO |
Signal Current-Max |
0.025A |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
CD74HC4316MG4 Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. Increasing operating temperature to around -55°C~125°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 4 channels. An 4.5V voltage supply should allow the electrical part to be turned on and run. It is part of the design of the 16 series that this electronic component is included. Based on SPST - NO switching circuits, these analog multiplexers work. Look for analog switch ic variants by searching with 74HC4316. This digital multiplexer has 170Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. An effective Dual, Single supply digital multiplexer. There should be 2V voltage fed to the electrical part below 2V. The switch multiplexer may be damaged if it is exposed to voltage greater than 16μA. For this switch, a dual supply voltage is feasible, but it must not exceed 5VIf you are using a dual power supply, you should attach at least 1V. 200MHz-bandwidths can be used to transfer data between multiplexers. Don't miss this electronic component's additional features, such as: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY.
CD74HC4316MG4 Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
Additional Features: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
CD74HC4316MG4 Applications
There are a lot of Texas Instruments CD74HC4316MG4 Analog Switches & Multiplexers ICs applications.
- Remote wireless modules
- Data Acquisition Systems
- Communication systems
- Automotive applications
- Audio and video switching
- Imaging
- SDH
- Residential Gateways, Home Gateway/Router
- Precision test equipment
- Transmit